We’re Your Local EV Home Charger Installation Experts
We’re familiar with the leading manufacturers’ latest Level 2 EV charger models. As part of your electric vehicle charging installation, we’ll help you decide on the right Level 2 charger for your vehicle, and then:
- IPull any necessary permits and ensure electrical code compliance.
- IInstall the charger to the wall of your garage (or carport).
- IRun a new 220-volt EV charger circuit from the home charger to your electrical panel.
- PUpgrade the electrical panel if needed. (It will be in the estimate.)
- PFully test your new system and show you how it works.
- PHelp you apply for local and federal rebates and tax credits.

Hear What Local Homeowners Say About Akian
EV charger installation planning
Plan a Home EV Charger Installation Around Your Electrical System
Home charging plans depend on the charger you select, where it will be installed, and the capacity and layout of your home’s electrical system. An electrician can assess the existing service and explain whether the proposed work calls for a new circuit or other electrical updates. Akian provides residential electrical services and can discuss charger placement, project scope, and next steps.
Home EV Charger Service, Planning, and Related Electrical Work
Home EV Charger Installation
Discuss a home Level 2 charger, the vehicle you plan to charge, and the preferred installation location.
Electrical Capacity Review
The home’s electrical capacity should be assessed for the selected charger and proposed installation. Some homes may need additional electrical work.
Installation Planning
Share the parking location, charger model if selected, and the location of the electrical panel to help define the project scope.
Related Electrical Services
If the project may involve panel work, review Akian’s electrical panel upgrade service and ask which work is appropriate for your home.
Related EV charger topics
Five Topics to Review Before Scheduling
Level 2 Home Charging
Level 2 charging uses a 240-volt connection. Compare home charging options in the U.S. Department of Energy’s home EV charging guide, then discuss the equipment and installation plan with an electrician.
Electrical Capacity and Panel Upgrades
Whether the existing electrical service can support a charger depends on the home and planned equipment. Ask for an assessment; if panel work is part of the recommended scope, see Akian’s panel upgrade information.
Charger Location and Circuit Routing
Note where the vehicle is parked, where you want the charger, and the route to the electrical panel. These details help an electrician assess installation requirements and discuss the work involved.
Electrical Code and Permit Questions
Ask which code and permit requirements apply to your installation. Massachusetts publishes its current requirements on the Massachusetts Electrical Code page; project requirements should be confirmed for the specific property and scope.
Service Availability in Nearby Communities
Akian lists communities it serves on its service areas page. Contact Akian to confirm availability for your address and the work you are considering.
Installation planning guide
Planning a Home EV Charger Installation
Before requesting an installation estimate, identify the vehicle you plan to charge, the parking location, and where you would like the charger mounted. If you have selected equipment, share its model with the electrician. The home’s electrical capacity and the route between the charger and panel help determine the work to assess. The U.S. Department of Energy explains that an electrician can evaluate whether a home can support Level 2 charging and whether additional work may be needed. For related project questions, review Akian’s electrical services and panel upgrade information. Contact Akian to discuss the proposed scope and next steps.
More questions
Additional EV Charger Installation FAQs
Will every home need an electrical panel upgrade for an EV charger?
No single answer applies to every home. An electrician can assess the existing electrical service, the charger, and other electrical loads to determine whether additional work may be needed. The U.S. Department of Energy’s home charging guide describes this assessment.
What information should I have ready when I contact Akian?
Share your property location, where the vehicle is parked, the charger location you prefer, and the charger model if you have selected one. You can also describe any electrical panel or circuit details that are readily available. Use Akian’s contact page to begin a project conversation.
Further reading
Helpful EV Charger and Electrical Resources
Akian Electrical Services
Review Akian’s electrical service information and discuss the work your project may require.
Electrical Panel Upgrades
See Akian’s information about electrical panel upgrade service if panel capacity is a question for your project.
Akian Service Areas
Check the communities listed by Akian and confirm service availability for your address.
U.S. Department of Energy: Home Charging
Official guidance about home charging options and assessing electrical capacity.
Massachusetts Electrical Code
State information about the electrical code in Massachusetts.
Contact Akian
Ask about project scope, service availability, and the next steps for an EV charger installation.
Discuss Your Home EV Charger Project
Tell Akian where you want the charger and what equipment you are considering. Call (617) 458-8189 or use the contact page to ask about availability and next steps.
Need Service? Message Us
Fill out the form below or call us at(617) 458-8189 for immediate 24/7 assistance.
EV Charging FAQs
Older homes might need electrical work, often unnoticed. A system checkup can reveal if an upgrade is necessary for better power distribution and safety. Upgraded panels offer more power and convenience, reducing fire hazards posed by faulty systems. Professional electricians ensure safety by assessing current systems, identifying issues, and inspecting all electrical components. While upgrades involve costs, the safety and efficiency benefits for your home are invaluable.
If you have questions or think it’s time to upgrade your electrical system, call Akian at (617) 458 8189 or Book Now
How much does it cost to install an EV charger at home?
The cost to install an electric vehicle charger varies due to several factors, including the need to upgrade the amp service, the price of the charging equipment, and the availability of any local, state, federal, or manufacturer rebates. We’ll help you find rebates you may qualify for and provide a detailed cost estimate before we begin work.
Is 150-amp service enough for EV charging?
To install a Level 2 charger, you will probably need 150-amp or 200-amp service. For 100-amp service or less, your EV or Tesla charger will probably take up too much capacity for your home. We recommend upgrading to 200-amp service to ensure you have enough capacity to handle the electrical demands of your home.
Do I need an electrician for EV charger installation?
Yes, you should always work with a licensed, experienced electrician to install an EV charger (or perform any other electrical work in your home). Installing an EV charger without a permit may violate the charger warranty and jeopardize your homeowners insurance coverage.
What else should I know about EV chargers?
They’re more affordable than you might think! Akian’s licensed Master Electricians will help you identify any manufacturer, local utility, state, or federal EV rebates that may lower EV charger installation costs. Contact our team to learn more about the variables that impact residential EV charger selection and electrical panel requirements.
Does Akian pull local electrical permits for charging station installations?
Yes. Every Level 2 EV charging station installation requires a dedicated 240-volt circuit and municipal electrical permitting to comply with the Massachusetts Electrical Code. Our licensed Master Electricians manage the entire permitting process and coordinate municipal inspections for complete safety and insurance compliance.
What areas in Massachusetts does Akian service for home EV charger installation?
Akian’s licensed electricians provide residential Level 2 EV charger installations across Greater Boston and Eastern Massachusetts, primarily serving Middlesex, Suffolk, and Norfolk counties—including Watertown, Newton, Belmont, Waltham, Boston, Brookline, and neighboring towns. We do not provide standard residential service to Western Massachusetts areas such as Springfield. To check coverage for your location, view our Areas We Service directory or call (617) 458-8189.

